See what our Experts say about this Blaylock Industries Trailer Tongue Lock

• Do You Have Replacement Keys for Blaylock Locks?
  Hey David. I didn't see any order number so I am not sure which Blaylock lock you purchased. We do have a couple of replacement keys for Blaylock Total-Encasement Coupler Locks like the item # BLTL-22 you were looking at. I would just need to know what number is stamped into the side of your remaining key to see if we have one that matches. We do not have replacement keys for Blaylock locks like item # BLEZ-302 though. I recommend reaching out to your local locksmith and seeing if they...
  view full answer...
• Recommended Coupler Lock For A Big Tex Trailer With A Sliding Round Coupler
  It sounds like your Big Tex car hauler trailer uses a collar lock coupler like the Bulldog Collar-Lok Coupler # BD028442. The most secure lock for a coupler like this will be the Blaylock Total-Encasement Coupler Lock. We have part # BLTL-23 for a 2-5/16" ball coupler, or the # BLTL-22 for a 2" ball coupler. The total encasement locks render the coupler completely inoperable when secured in place. They are very easy to put on, and virtually impossible to take off without the key. If you...
  view full answer...
• Looking For A Lock For A Trailer With A Bulldog Coupler
  Hello Rane, thanks for reaching out. Does your trailer have one of the Bulldog collar lock style couplers like part # BD028243? If so, I recommend the Blaylock Total-Encasement Coupler Lock since it is made specifically for the collar lock style couplers. You can use part # BLTL-22 for a 2" ball and part # BLTL-23 for a 2-5/16" ball. If you have just a standard lipped coupler, I recommend the Blaylock EZ Lock Trailer Coupler Lock # BLTL-33-40D which will work with 1-7/8", 2", and 2-5/16"...
  view full answer...
• Lock Recommendations for a Collar-Lok Style Trailer Coupler
  It sounds like you have a Collar-Lok coupler such as # BD028244. For that type of coupler you could use lock # BLTL-23. The body is aluminum but the pin inside that goes way up into the coupler is steel. It fits 2-5/16 inch Collar-Lok couplers. For 2 inch models use # BLTL-22. Another option, if your coupler has the pin behind the collar to keep the collar from sliding back, is to use a lock such as # e98888 in place of the pin. This would prevent the collar from opening all the way. Or,...
  view full answer...
• Which Coupler Lock Can I Use While Trailer Is Still Attached To The Tow Vehicle
  I have a solution for you, the Blaylock Total-Encasement Coupler Lock for 2" Bulldog Collar-Lok Couplers - Push Button # BLTL-22 is designed to put on your trailer while it is not coupled to your tow vehicle. We can however use the trailer Adjustable Trailer Coupler Latch Lock - 1/2" to 2-1/2" Span - 1/4" Diameter # e98883 to secure your trailer while it is coupled to your tow vehicle.
  view full answer...
• Recommended Coupler And Hitch Lock Combination Keyed Alike
  For your sleeve-lock coupler, I recommend the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches # 3794DAT. This will give you the hitch lock, the coupler ball lock and the pin lock. This kit is the best kit that has all three components keyed alike. If you want a better fit, you may need to move to a system with different keys. This Master Lock Set is very nice, but if you want the best coupler lock, I recommend you get something like the Blaylock...
  view full answer...
• Does BlayLock Coupler Lock # BLTL-22 Fit 2003 Ram Collar Lock Style Coupler
  Yes, the BlayLock Coupler Lock part # BLTL-22 does fit your Ram coupler jack that is a collar lock style like the # CA-5196-B. Your Ram coupler and the # CA-5196-B are the same as they are both made by same company.
  view full answer...
• Is There Blaylock Total Encasement Coupler Lock that Fits 2-5/16 inch Hitch Ball
  We have a version of the Blaylock Total Encasement Coupler Lock that fits the 2-5/16 inch ball size with the part # BLTL-23 but the part # BLTL-22 only fits the 2 inch ball size.
  view full answer...
• Recommendation for a Coupler Lock for a Collar-Loc Trailer Coupler
  For a Collar-Lok coupler I recommend a lock designed for then such as # BLTL-23 (2-5/16 inch ball), # BLTL-20-40D (1-7/8 to 2-5/16 inch balls), or # BLTL-22 (2 inch ball).
  view full answer...
• Replacement Keys for Blaylock Total-Encasement Coupler Lock
  There are replacement keys available for the Blaylock Total-Encasement Coupler Lock # BLTL-22. You will need to get the key that corresponds to the one on the key; I will list the key numbers we have available as replacements, and you would be able to order the one with the corresponding number. Blaylock Industries Replacement Key 51131: # BL040-TL38KEY51131 Blaylock Industries Replacement Key 51132: # BL040-TL38KEY51132 Blaylock Industries Replacement Key 51133: # BL040-TL38KEY51133 Blaylock...
  view full answer...
• Coupler Lock for a 2 Inch Trailer Coupler
  Blaylock Total-Encasement Coupler Lock # BLTL-22 is designed for Bulldog Collar-Lok couplers which are more narrow than regular coupler so I do not recommend trying to use it. I recommend using a coupler lock such as # FA86-0015-316 or # 379DAT for your 2 inch coupler. I have linked review videos on both locks for you.
  view full answer...
• Availability of Replacement Keys for Blaylock Total Encasement Trailer Coupler Lock # BLTL-22
  Although we can obtain replacement keys from Blaylock, we do not have extra keys on hand to ship out with the product. Your best bet would be to have some duplicates made locally by a locksmith. When you receive the lock, be sure to record the key number and keep it in a safe place.
  view full answer...

Do you have a question about this Trailer Tongue Lock?